Now serving Buckhead, Virginia-Highland, Druid Hills, and Inman Park
Hand-measured basswood and poly shutters for the Craftsman bungalows of Virginia-Highland, the Georgian estates of West Paces Ferry, and the new-build infill along the BeltLine.
A 29-year Atlanta installer
Atlanta's building stock does not behave like one city. A 1920s Craftsman bungalow in Virginia-Highland has wavy original sash, Old Fourth Ward and Grant Park lean into 1900s-era cottages with crooked openings, the Druid Hills Olmsted blocks carry tall double-hung windows that were never quite plumb, and the West Paces Ferry Georgians in Buckhead were built true but their casement infill rarely is. We have measured for all of them, since 1996, and a hand-templated shutter is the only one that fits a 1924 sash without a gap big enough to slide a quarter through.
What is consistent across Atlanta is the climate math. May through September delivers dewpoints above 70 degrees and heat indexes north of 100, March through May piles pollen on every louver, and the west-facing windows on a Druid Hills brick four-square or an Inman Park townhouse will cook a poorly chosen frame in six summers. The right answer is kiln-dried basswood with a sealed factory finish for the dry rooms and an engineered poly shutter for kitchens, baths, and west-facing sunrooms. Most whole-house Atlanta jobs we quote end up as a mix.
If you are pricing this for an Atlanta home, the consult is the only honest way to land a number. Window counts vary, arch geometry varies, and the difference between an as-built opening and the builder's spec opening can be a half inch in either direction. Schedule a free in-home measure and we will hand you the written quote on the spot, the warranty terms on paper, and a lead time we will hold to.
The shutters Atlanta orders most
The Atlanta default for living, dining, and primary bedrooms. Kiln-dried basswood, dovetailed frame, factory-sealed finish in white, cream, off-white, and 12 stains. Lifetime warranty.
For Atlanta bathrooms, kitchens, and west-facing rooms. Will not warp, yellow, or peel in humidity or direct sun. 25-year frame warranty, lifetime warranty on the tilt mechanism.
For the gabled fronts of Buckhead Georgians, Inman Park infill, and the half-rounds above Druid Hills entry doors. Sunburst, eyebrow, rake, full-radius. Hand-templated on site.
What Atlanta actually demands
Atlanta is humid-subtropical, not coastal. The shutters we install have to handle 75 percent average summer humidity, a 90-day pollen season, and the west-facing UV load that bleaches a poor finish inside three years. We kiln-dry basswood to 6 to 8 percent moisture content and seal it on every face before paint, which keeps the panel from breathing the porch air and bowing.
A Virginia-Highland kitchen with a steam-heavy 36-inch range, a Druid Hills primary bath with a curbless shower, or a Buckhead pool house all want poly, not basswood. We carry Norman Woodlore and Graber poly with a matte finish that reads as wood from across the room and an interior aluminum spine that holds tolerance through a Georgia summer.
The 1920s and 1930s sash windows in Virginia-Highland, Inman Park, Candler Park, and Morningside are tall and narrow. The 3.5-inch louver gives you the right ratio of slat to opening, lets in more light when open, and stays true to the period. The 2.5-inch louver reads as 1980s. The 4.5-inch louver reads as new-construction and overpowers the trim.
The 8-foot to 10-foot windows in Buckhead Georgians and the Brookwood Hills estates ask for a 4.5-inch louver, double-hung tier-on-tier so the lower panel privatizes while the upper stays open, and a hidden tilt rod on the back so the front face reads clean. We measure these jobs with a laser and a story stick, both, because the eye picks up a 1/16-inch off-square on a 9-foot panel.
The arched openings above entry doors in Druid Hills, the palladiums in Buckhead, and the half-rounds in Inman Park infill all want a hand-traced template. Builder drawings are seldom what the framer actually cut. We bring a roll of template paper to the consult, trace the arch with a pencil, and ship that paper template to the manufacturer along with the laser measurements.
Most of our Atlanta installs happen in occupied homes. We dust-sheet, install one room at a time, and tidy as we go. A 12-window whole-house job typically runs one day on site for poly, one and a half for basswood, depending on how many arches we are cutting in. We confirm parking the day before because half of intown Atlanta is permit-only.
What plantation shutters cost in Atlanta
Plantation shutter pricing in Atlanta breaks down by material, louver size, and the special details (arched tops, hidden tilt rods, tier-on-tier configurations). Below is the real installed range we are quoting in 2026 dollars. A consultation refines it for your specific window count and the as-built openings.
Engineered poly shutters sit at the bottom of that range, typically $22 to $30 per square foot installed. Hybrid wood-poly composites land $28 to $36. Premium kiln-dried basswood with a factory-sealed finish lands $35 to $45. Hidden tilt rod, tier-on-tier, and arched custom shapes add 10 to 25 percent depending on the geometry.
A typical four-bedroom Virginia-Highland bungalow with 18 windows averages $7,500 to $14,000 for whole-house basswood coverage. A Buckhead Georgian with 30 windows including three palladium arches runs $18,000 to $32,000. A Druid Hills primary bath alone with three poly shutters lands $1,800 to $2,800. Final number depends on the as-built measurement, not the builder drawing.
We do not run loss-leader pricing or "starting at" gimmicks. The number we quote at the consult is the number on the install-day invoice, with no surprise upcharges for measure, delivery, or warranty paperwork. Book a free in-home measure and we will hand you the final number on the spot.
Final price comes from in-home measure. No obligation. 50% deposit, balance install day.
I built a custom 10,000 square foot home and could write a book about the headaches. The blinds, shades and shutters for all 198 windows and doors were the easiest part of the entire build.Eddie H., Dallas, GA
Across Atlanta and Fulton County
Questions Atlanta homeowners ask
For an Atlanta home, custom plantation shutters run roughly $22 to $45 per square foot installed depending on material and louver size. Basswood lands at the top of that range, poly hybrids in the middle, and economy poly at the bottom.
A typical four-bedroom Virginia-Highland bungalow with 18 windows averages $7,500 to $14,000 for whole-house coverage. A Buckhead Georgian with 30 windows and a few palladium arches runs $18,000 to $32,000. Final price comes from the in-home measure with no obligation.
From the in-home measure to install day, our Atlanta lead time runs 5 to 6 weeks for basswood and poly. The build happens at our manufacturer partner; we drive the install. A typical full-house install takes one to two days on site, depending on window count and whether we are working around occupied rooms.
Yes. Our trucks roll inside I-285 every week. We have measured plantation shutters across every Atlanta neighborhood that matters: West Paces Ferry and Brookwood Hills in Buckhead, the bungalows of Virginia-Highland and Candler Park, the Olmsted-era homes of Druid Hills, the modern infill of West Midtown, the historic stock of Grant Park and Inman Park, and the new-build along the BeltLine.
Our basswood plantation shutters carry a lifetime warranty against warp and twist. Poly shutters carry a 25-year limited warranty on the frame and a lifetime warranty on the tilt mechanism. Warranties are not transferable to the next owner of the home.
Atlanta humidity is real but it is not coastal. Kiln-dried basswood with a sealed factory finish handles July dewpoints without movement and gives you the truest shutter look. Poly is the right answer for bathrooms, kitchens with a steam-heavy stove, sunrooms with afternoon west sun, and anywhere a basswood frame would see direct splash. Most Atlanta whole-house jobs end up as a mix of both.
Yes. We fabricate sunburst, eyebrow, rake, and full-radius shapes to your exact opening template. We hand-trace the arch on site rather than relying on builder drawings, because the as-built arch is almost never the spec arch. See our arches and palladiums page for the full range of shapes.
Yes. We work with several Atlanta builder-developers on whole-community shutter packages, and we walk individual townhomes and condos along the BeltLine, Atlantic Station, and Adams Park. The shorter lead time on poly is helpful for tight builder closing schedules; we can phase a 12-unit package across two trips if needed.
Tilt motorization is available on plantation shutters using Somfy or Lutron motors, controlled by wall switch, RF remote, or smart-home app. It is most common on tall second-story windows in Buckhead Georgians and on hard-to-reach palladium arches. See our motorized shades and shutters page for the integration options.
Begin here
Tell us where you live in Atlanta and what you have in mind. We will respond within one hour with a consultation time that fits.
No obligation. 50% deposit, balance install day. Samples and a written quote on the spot.
