Basswood, 3.5" Louver
The Cartersville default for the historic brick four-squares and the newer subdivision living rooms. Kiln-dried basswood, dovetailed frame, sealed factory finish.
By Norman · Hunter Douglas
See basswood specs →
Now serving Sam Jones, Etowah Riverwalk, Old Tennessee Highway
Plantation Shutters in Cartersville, Georgia
Hand-measured basswood and poly shutters for the historic brick four-squares near Etowah Indian Mounds and the newer Bartow County subdivisions out toward Adairsville.
4-6 wk basswood lead
2.5", 3.5", 4.5" louver sizes
Lifetime basswood warranty
1 hour callback, six days a week
4-6 wkBasswood lead time
130+Window-treatment options
LifetimeBasswood frame warranty
1 hourCallback, six days a week
A 29-year Cartersville installer
The shutters Cartersville homeowners keep specifying, room after room.
Cartersville reads as two cities. The historic core around Etowah Indian Mounds, the Sam Jones streets, and the Old Tennessee Highway corridor is 1900s to 1940s brick four-squares and bungalows, with tall narrow sash, original wavy glass, and openings that are seldom plumb. Step a mile outside that core and the Bartow County stock turns to newer brick ranches, 2000s subdivision builds along Etowah Riverwalk, and the custom homes going up toward Adairsville and Emerson. We have measured shutters in both halves since 1996, and the conversation we have on the front porch is very different in each.
What is consistent is the climate. Bartow County humidity hits 75 percent through July and August, pollen blankets the porches from late March through May, and the west-facing rooms on the Sam Jones side bake from 3pm through dinner. Our kiln-dried basswood handles the dry rooms; our poly shutters from Norman Woodlore and Graber handle the kitchens, baths, and west-facing sunrooms without yellowing or warping.
If you are pricing this for a Cartersville home, the in-home measure is the only honest path. The 1920s sash on a Sam Jones brick is not the same opening as the 2015 vinyl on an Etowah Riverwalk house, and our pricing reflects the difference. Book the free in-home measure and we will hand you the written quote on the spot.
The Cartersville defaults
Three shutter builds that fit Bartow County homes.
Poly, 2.5" or 3.5" Louver
For Bartow County kitchens, baths, sunrooms with afternoon west sun. Will not warp, yellow, or peel in humidity.
By Norman Woodlore · Graber
See poly specs →
Arched & Palladium
For the gabled fronts on the newer custom builds and the half-rounds above older Cartersville entry doors. Hand-templated on site.
By Norman · Lotus
See custom shapes →What Cartersville actually demands
Built for the way Bartow County homes are built.
Built for the brick-and-sash reality of historic Cartersville
The 1900s to 1940s brick stock on Sam Jones and Old Tennessee Highway was built with tall narrow sash, original wavy glass, and openings that are rarely plumb. We laser-measure, then hand-cross-check with a story stick. A factory standard-size shutter will not fit; a hand-templated basswood shutter will.
Material choices that survive Bartow humidity and west sun
Summer dewpoints sit in the low 70s and the pollen season runs March through May. Our basswood is kiln-dried to 6 to 8 percent moisture content and sealed on all six faces, so the panel does not absorb porch air and bow over a decade. Poly is the right answer for kitchens, baths, and any west-facing room that takes a hard 3pm sun.
Why the Sam Jones blocks pick basswood 3.5"
The 3.5-inch louver gives the right ratio of slat to opening on the tall narrow 1920s sash. It lets in more light when open, reads true to the period, and looks correct against the original wide casing. The 4.5-inch louver overpowers historic trim and reads as new-construction.
What Etowah Riverwalk subdivision homes spec
The 2000s and 2010s subdivision builds out by Etowah Riverwalk and toward Emerson lean on a 3.5-inch louver in basswood for formal rooms and a 2.5-inch louver in poly for secondary baths. We carry the matching whites and creams that line up with builder-grade trim, so the shutter does not visually fight the case molding.
Arched and palladium templates done by hand
The custom builds going up around Cartersville often spec palladium and full-radius shapes on the front elevation. We bring template paper to the consult, trace the arch with a pencil, and ship that template to the manufacturer along with laser measurements. Builder drawings are seldom what the framer actually cut.
Local warranty service, not a regional ticket
Lifetime warranty on basswood does not mean much if the company is in another state. Our Cartersville warranty service is a phone call to 770-949-9020 and a same-week or next-week visit. The truck rolls from Douglasville, which is a one-hour drive, not from a regional support center.
What plantation shutters cost in Cartersville
Honest pricing, before the in-home measure.
Plantation shutter pricing in Cartersville aligns with metro Atlanta. Below is the real installed range we are quoting in 2026 dollars.
$22 - $45 / sq ftinstalled, basswood and poly
Engineered poly sits at the bottom of that range, hybrid wood-poly in the middle, premium kiln-dried basswood at the top. Hidden tilt rod, tier-on-tier, and arched custom shapes add 10 to 25 percent. A 1920s Sam Jones brick four-square with 16 windows averages $6,500 to $12,500 in basswood. An Etowah Riverwalk two-story with 22 windows lands $9,000 to $17,000.
We do not quote loss-leader "starting at" pricing. The number we hand you at the consult is the number on the install-day invoice, written, with the warranty paperwork attached. Book the free in-home measure.
Final price comes from in-home measure. No obligation. 50% deposit, balance install day.
The plantation shutters that us kids ordered for Mom's trailer were everything she had always dreamed of. You would think you had just walked into a multi-million dollar home.Tony, Fit-Rite Muffler
Across Cartersville and Bartow County
Neighborhoods we measure every week.
Sam JonesEtowah RiverwalkOld Tennessee Highway
AdairsvilleEmersonEuharleeTaylorsvilleAllatoona
AtlantaMarietta
RomeDouglasville
Georgia overview
Questions Cartersville homeowners ask
What you actually want to know.
What do plantation shutters cost in Cartersville?
Custom plantation shutters in Cartersville run roughly $22 to $45 per square foot installed. A 1920s Sam Jones brick four-square with 16 windows averages $6,500 to $12,500 in basswood. An Etowah Riverwalk two-story with 22 windows lands $9,000 to $17,000.
Final price comes from the in-home measure with no obligation.
How long does it take from order to install?
Our Cartersville lead time runs 5 to 6 weeks for basswood and poly, consult-to-install. The build happens at our manufacturer partner; we handle the install. A full-house install typically runs one to two days on site.
Do you cover the Sam Jones and Etowah neighborhoods?
Yes. We have measured shutters across Cartersville, including Sam Jones, Etowah Riverwalk, Old Tennessee Highway, the Bartow County brick-ranch corridors, the historic downtown bungalows, and the newer subdivisions out toward Adairsville and Emerson.
What is the warranty?
Our basswood plantation shutters carry a lifetime warranty against warp and twist. Poly shutters carry a 25-year limited warranty on the frame and a lifetime warranty on the tilt mechanism. Warranty service is a phone call and a same-week or next-week visit.
Which material handles the historic Cartersville brick homes best?
Kiln-dried basswood in a 3.5-inch louver gives the right slat-to-opening ratio for the tall narrow 1920s sash and reads true to the period. Poly is the right call for the kitchen and bath updates, not the formal rooms. See our plantation shutters page for the full material range.
Can you fit arched and palladium windows on Bartow custom builds?
Yes. We hand-template arched, palladium, sunburst, and full-radius shapes on site. See our arches and palladiums page for the full range.
Begin here
Have us at your Cartersville window this week.
Tell us where you live and what you have in mind. We will respond within one hour with a consultation time that fits.
No obligation. 50% deposit, balance install day. Samples and a written quote on the spot.